Linear Heat Detection – ATP Solutions

SmartVision (Software)

Jordan Roberts — Tue, 26 Nov 2024 04:10:56 +0000

AP Sensing’s SmartVision software takes the guesswork out of data analysis. It collects and integrates monitoring data across multiple devices and technologies such as Distributed Temperature Sensing (DTS), Distributed Acoustic Sensing (DAS), Distributed Vibration Sensing (DVS), CCTV cameras and other sensors.

This data management and analysis program provides a schematic asset visualization for easy orientation, and the current status of all configured instruments. In the case of a critical event, personnel is informed directly through the system and can react accordingly with the necessary emergency measures to minimize downtime.

SmartVision stores recorded information in a central database and makes this data available for analysis, reporting and export. The data is accessible to multiple users and from multiple locations. Points of interest can be analyzed with historic trend analysis, and historical data is always available.

Linear Heat Detection Cables (Fiber Optic)

Jordan Roberts — Tue, 26 Nov 2024 03:47:43 +0000

Fiber optic sensor cables can be used not only for data transmission, but also for measuring temperature, strain, and acoustic signals, even in harsh environments.

AP Sensing’s Distributed Temperature Sensing (DTS) and Distributed Acoustic/Vibration Sensing (DAS & DVS) solutions, enable efficient monitoring of critical infrastructures and buildings such as rail and road tunnels, pipelines, bus ducts and parking garages.

Signaline LocatorPlus-EN Linear Heat Detector Controller

Jordan Roberts — Mon, 24 Jun 2024 07:02:20 +0000

ActivFire Approved Linear Heat Detector Controller and Alarm Locator

Discover the efficiency of Signaline FT-EN Linear Heat Detectors for reliable and accurate linear heat detection.

The Signaline LocatorPlus-EN is a dual zone control monitor module for the Signaline FT-EN cables. With each zones able to monitor 1000m of cable the single unit can cover a vast detection area.

Signaline LocatorPlus-EN is simple and quick to set up and requires no specialist software or programming tools.

There are two operating modes allowing the zones to operate independently or interlocking.

In the event of an alarm the Signaline LocatorPlus-EN immediately displays the alarm location and zone of the activation. Allowing quick and efficient alarm notification.

The Signaline LocatorPlus comes in a IP65 box making it suitable for field mounting.

Signaline LocatorPlus-EN is used with the Signaline FT-EN Linear Heat Detection cables and FT-EOL-EN to make a complete EN54 part 28 & ActivFire approved system.

Signaline FT-88-EN Cable

Jordan Roberts — Tue, 25 Jun 2024 03:14:14 +0000

LHD Alarm Temperature: 88°C, LSZH, EN54 Part 28 & ActivFire Approved.

Linear heat detection is a method used to detect heat or fire along a linear path, such as in car parks, solar panels, tunnels or conveyor belts. It works by using a heat-sensitive cable that detects changes in temperature. When the cable reaches a certain temperature, it triggers an alarm or activates a fire suppression system.

The cable outer coating is made from a UV and chemical resistant compound making the cable suitable for even the harshest of environments. Signaline FT-78-EN and Signaline FT-88-EN are now approved for environmental group III – the highest environmental classification!

Signaline FT-EN is used with the Signaline LocatorPlus-EN and FT-EOL-EN

Signaline FT-78-EN Cable

Jordan Roberts — Tue, 25 Jun 2024 03:32:35 +0000

LHD Alarm Temperature: 78°C, LSZH, EN54 Part 28 & ActivFire Approved.

Signaline FT-EN is used with the Signaline LocatorPlus-EN and FT-EOL-EN.

Signaline FT-68-EN Cable

Jordan Roberts — Tue, 25 Jun 2024 04:37:32 +0000

LHD Alarm Temperature: 68°C, LSZH & EN54 Part 28.

Signaline FT-EN is used with the Signaline LocatorPlus-EN and FT-EOL-EN.

Signaline FT-EOL-EN End of Line Unit

Jordan Roberts — Tue, 25 Jun 2024 05:01:22 +0000

The Signaline FT-EOL-EN End-of-Line Unit has been approved to EN54 part 28 for use with the LocatorPlus-EN and FT-68-EN, FT-78-EN or FT-88-EN Signaline Linear Heat Detection cables.

It is designed to effectively terminate up to two zones of FT-68-EN, FT-78-EN or FT-88-EN cable in a secure, weatherproof enclosure.

To help reduce installation cost the Signaline FT-EOL-EN can terminate two zones in a single unit. Furthermore, the built-in switches for testing a fault or alarm condition allow the integrity of the whole system to be functionally checked in situ, providing comprehensive testing and maintenance of the system.

Signaline Universal Connector Box (UCB)

Jordan Roberts — Tue, 25 Jun 2024 05:15:47 +0000

Junction Box and End of Line for Signaline Linear Heat Detection.

The Signaline Universal Connector Box (Signaline UCB) can be used as an end of line enclosure or junction box. This all-in-one solution reduces on-site time and cost.

It uses heat rated terminals and glands that can be used with any Signaline Linear Heat Detector.

Signaline UCB-Ex

Jordan Roberts — Tue, 25 Jun 2024 05:21:41 +0000

Ex Junction Box and End of Line for Signaline Linear Heat Detection.

Signaline UCB-EX is a multi-purpose Ex Enclosure for Signaline FT-EN and FT. A Signaline UCB-Ex can be used as an end of line unit or junction box.

It comes complete with cable glands, stoppers, terminal block and resistors meaning the product is suitable for any use on-site. Therefore reduces installation time and cost. The GRP enclosure ensures not only a very high IP rating but also excellent corrosion and UV resistance, making the Signaline UCB-Ex ideal for the harshest of areas.

Linear Heat Detection Unit (N45-Series)

conceptadmin — Tue, 09 Jul 2024 06:50:08 +0000

Addressable Fibre Optic Linear Heat Detection (LHD)

AP Sensing’s third generation of LHD offers the longest certified distance range on the market with up to 16 km and 4 channels for all distance ranges.

Two simultaneous temperature measurements allow fastest fire detection and precise temperature monitoring. Furthermore, significantly improved measurement times down to 1 second enable even faster fire detection.

Additional information below