The Discovery Marine Optical Smoke Detector works using the light scatter principle and is ideal for applications where slow-burning or smouldering fires are likely.

The Apollo Discovery Marine Optical Smoke Detectors are compatible with XP95, Discovery and CoreProtocol digital communication versions.

PLEASE NOTE – Installation base sold separately.

The Discovery Marine Heat Detector, distinguishable by the low airflow resistant case, uses a single thermistor to sense the air temperature around the detector.

The Apollo Discovery Marine Optical Smoke Detectors are compatible with XP95, Discovery and CoreProtocol digital communication versions.

PLEASE NOTE – Installation base sold separately.

The Discovery Marine Multisensor Detector comprises optical smoke and thermistor temperature sensors which give both a combined signal as well as a separate heat signal for improved false alarm management.

The Apollo Discovery Marine Optical Smoke Detectors are compatible with XP95, Discovery and CoreProtocol digital communication versions.

PLEASE NOTE – Installation base sold separately.

Apollo Discovery Marine Base Mounted UV Flame Detector. The Intelligent Base Mounted UV Flame Detector is designed to protect enclosed indoor areas where open fires may be expected. The detector has a fast acting response to flames up to 25m away and is equipped with a single UV sensor with a narrow spectral response in order to discriminate between flames and most spurious sources of radiation.

PLEASE NOTE – Installation base sold separately.

Apollo Discovery Marine Mounting Base. All detectors in the Discovery Marine range are for use with the Marine Mounting Base. The Mounting Base is a low insertion force base with stainless steel contacts for the detector terminals. XPERT cards are supplied with all bases.

The Discovery Marine Sounder Visual Indicator Base is a multifunctional device made up of a mounting base for Discovery fire detectors, a sounder, a visual indicator and a short-circuit isolator.

The Discovery Marine Sounder Visual Indicator Base is used to provide audible and visual warning of fire and is controlled by the appropriate fire control panel by means of the full Discovery protocol.

The base senses and isolates short circuit faults on XP95 and Discovery loops and spurs.

• Up to 20 detectors or their equivalent load, may be installed between isolating bases
• High-brightness LED
• Detects wiring short-circuits
• Minimises disruption from short-circuits

The Deckhead Mounting Box has six cable access ports for M20 glands and is secured to the mounting surface via two 5.4 mm holes in the webs.

Deckhead Mounting Box

Part Number: 45681-217

Accessory Kit

Part Number: 45681-218

PLEASE NOTE – The extension sleeve and adapter ring are sold as an additional accessory kit.

Apollo Discovery Manual Call Point Outdoor is used to manually initiate an alarm signal on the fire detection system.

• Suitable for weatherproof applications
• EN 54-11 & EN 54-17 Certified
• Resettable operating element
• 170° viewable LED
• XP95 & Discovery compatible

The Manual Call Point is used to manually initiate an alarm signal on the fire detection system.

• EN 54-11 & EN 54-17 Certified
• Resettable operating element
• 170° viewable LED
• Suitable for semi flush or surface mounting
• ‘Plug and Play’ terminal connections for faster wiring
• Continuity link for wiring test before commissioning
• XP95, Discovery and CoreProtocol compatible